#Swr Meter Cb Tuning How To Tune Your

Swr Meter Cb Tuning How To Tune Your

Hold the CB in transmit mode by pressing the PTT button on the mic. An easy to read signal/power/SWR meter, and heavy duty tuning knobs and switches.2: Tune your CB Radio to channel 1(one) and set the SWR meter switch in the Forward FWD position. Now that you know how to tune your CB radio without an SWR meter, you may be wondering how different your experience would be if you used an SWR meter.More Sources For 10 Meter Radios and Export CB Radios: GALAXY DX-2547. You need to make sure that there isnвЂ™t too much power being reflected back into the radio through the feedline from the antenna, which prevents the proper signal output. If the SWR is too high, not only is the performance of your CB seriously hindered, but you run a very high risk of damaging your radio. The basic idea behind tuning a CB antenna is to get the SWR to a suitably low reading.

Tuning a CB radio without an SWR meter is usually done at low power and the actual SWR reading is unknown.There is therefore a chance that the reading could be on the 1.6 mark. The coax is routed.SWR meters reduce the risks of damaging your CB radio since they show you the exact SWR readings. Its tuning can make you or break you. The aim is to keep the SWR reading below 1.5, and this is easy and fast to achieve with an SWR meter.If youve got no issue like such, then move forward and connect the SWR meter to the linear amp. When using an SWR meter, you can tell whether your antenna is tuned properly by reading the value on the meter.

The same cannot be said when tuning without an SWR since it has many requirements. You can also share an SWR meter with a friend. Since you know the exact SWR reading of your antenna, you can always know your SWR reading before making a major change to your setup.